
Memosens 2.0: En yeni sensör teknolojisi yeniden yüklendi
Memosens 2.0 dijital teknolojisi ile hayatı kolaylaştırın, proses güvenliğini artırın ve bağlantıda kalın.
pH 0 to 14 (1 to 12 application range)
–5 to 100 °C (23 to 212 °F) (0 to 80 °C (32 to 176 °F) application range)
1 bar, not intended for continues measurment in process
The Memosens CPL53E pH glass sensors is the all-rounder for use in the laboratory. It covers a wide variety of samples and application: whether check of measuring loops or random sampling. Thanks to Memosens 2.0 technology, this sensor provides reliable, highly accurate measurements with a fast response time. Furthermore, the electrode is long lasting and maintenance free since the sensors have a gel filling.
Memosens CPL53E is suited for:
Check of on-line measuring loops
Analysis of grab samples (on-site as well as in the laboratory)
Measurement at process points where regular checks are recommended
In standard applications as watery media, e.g. water based solutions.
Time-saving random sampling with pre-calibrated sensor which allows fast and easy switches of sensors
Easy handling with Memosens 2.0 bayonet connector
Supports the requirements of quality management with tamper-proof data storage including serial number and calibration history
Maintenance-free pH electrode without the need to refill electrolyte
Temperature compensation with integrated temperature sensor
Özelleştirilmiş ürünler
Teknik mükemmellik
Sadelik
Değişken
FLEX seçimleri | Teknik mükemmellik | Sadelik |
---|---|---|
Fundamental seçim Temel ölçüm ihtiyaçlarınızı karşılayın |
Teknik mükemmellik
|
Sadelik
|
Lean seçim Ana proseslerinizin üstesinden kolayca gelin |
Teknik mükemmellik
|
Sadelik
|
Extended seçim Proseslerinizi yenilikçi teknolojilerle optimize edin |
Teknik mükemmellik
|
Sadelik
|
Xpert seçim En zorlu uygulamalarınızda uzmanlaşın |
Teknik mükemmellik
|
Sadelik
Değişken |
Potentiometric
Measurements in standard applications in the laboratory
Digital Memosens 2.0 compact gel pH glass sensor for standard use in laboratories
Versatile pH sensor with very fast response time
pH 0 to 14 (1 to 12 application range)
Glass
Diameter: 12 mm (0.47 inch)
Shaft length: 120 mm (4.72 inch)
–5 to 100 °C (23 to 212 °F) (0 to 80 °C (32 to 176 °F) application range)
1 bar, not intended for continues measurment in process
NTC 30kΩ
Inductive, digital connection head with Memosens 2.0 technology
IP68
Aksesuarlar
Benzer ürünler
Tarayıcı deneyiminizi iyileştirmek, site işlevselliğini optimize etmek adına istatistikleri toplamak ve size uygun reklam ve içerikler göstermek için çerezleri kullanıyoruz.
"Tümünü kabul et" seçeneği ile çerez kullanımımıza rıza göstermiş olursunuz.
Daha fazla ayrıntı için lütfen göz atın: Çerez Politikamız .