
Özelliklere genel bakış
-
Measured variables
NH3, HF, HCl, H2O
-
Device version
Cross-duct version
Measuring probe version -
Ambient temperature range
–20 °C ... +50 °C
Depends on parameterization; temperature change max. ±10 °C/h
Uygulama alanı
Reliability, accuracy and very short response times are the decisive features of the GM700 laser gas analyzer. Based on the TDLS (tunable diode laser spectroscopy) principle, the GM700 measures different gas components, such as NH3, HF, HCl oder H2O, by specific light absorption. In-situ measurement is particularly well-suited to the rapid determination of gas concentrations in process control and emission monitoring.
Ammonia slip measurement in DeNOx plants
Emission monitoring of hydrogen fluoride in aluminum smelters
HCI measurement in combustion plants
Device properties:
High selectivity due to high spectral resolution
Short response times
No calibration required
No moving parts: minimal wear and tear
No gas sampling or conditioning required
Avantajlar
In-situ measurement directly in the process for nearly uncompromised measured values
Measuring probe or cross-duct types for very good adaptation to the requirements of your measuring task
High reliability during operation
Can also be used in harsh ambient conditions
Enables the detection of quick and short-term process fluctuations
Xpert seçim
-
Özelleştirilmiş ürünler
- Zorlu uygulamalar için tasarlanmış
Teknik mükemmellik
Sadelik
Değişken

-
Özelleştirilmiş ürünler
- Zorlu uygulamalar için tasarlanmış
Teknik mükemmellik
Sadelik
Değişken
FLEX seçimleri | Teknik mükemmellik | Sadelik |
---|---|---|
Fundamental seçim Temel ölçüm ihtiyaçlarınızı karşılayın |
Teknik mükemmellik
|
Sadelik
|
Lean seçim Ana proseslerinizin üstesinden kolayca gelin |
Teknik mükemmellik
|
Sadelik
|
Extended seçim Proseslerinizi yenilikçi teknolojilerle optimize edin |
Teknik mükemmellik
|
Sadelik
|
Xpert seçim En zorlu uygulamalarınızda uzmanlaşın |
Teknik mükemmellik
|
Sadelik
Değişken |
-
Measuring principle
Diode laser spectroscopy (TDLS)
-
Measured variables
NH3, HF, HCl, H2O
-
Performance-tested measurands
HF
-
Device version
Cross-duct version
Measuring probe version -
Certified measuring ranges
HF: 0 ... 5 mg/m³ / 0 ... 25 mg/m³
Suitability-tested in the cross-duct type -
Measuring range
NH3 (up to 20% H2O by volume): 0 ... 25 ppm / 0 ... 4,000 ppm
NH3 (up to 40% H2O by volume): 0 ... 25 ppm / 0 ... 100 ppm
HCl: 0 ... 10 ppm / 0 ... 3,000 ppm
HF: 0 ... 5 ppm / 0 ... 2,000 ppm
Measuring ranges refer to 1 m measuring path
Measuring ranges depend on application and device version -
Ambient temperature range
–20 °C ... +50 °C
Depends on parameterization; temperature change max. ±10 °C/h -
Ambient humidity
≤ 95 %
Relative humidity; non-condensing -
Degree of protection
IP65/IP66/IP67
-
Conformities
Only for HF
Approved for plants requiring approval
2001/80/EC (13. BImSchV)
2000/76/EC (17. BImSchV)
27. BImSchV
German Clean Air Regulations
EN 15267
EN 14181 -
Product safety
CE
-
-
Kullanma Talimatı (BA)
GM700, measuring probe
-
Kullanma Talimatı (BA)
İngilizce versiyonu - 01/2025Gas Analyzer, Probe Version
EN TR 01/01/2025Dil:
İngilizce
Versiyon:
01/01/2025
Dosya boyutu:
10 MB
Dosya adı:
8029926_1R0E_OI_GM700_Probe_en_V2-2_2025-05_EHS.pdf
-
-
-
Ex Güvenlik Talimatı (XA)
Safety Information
-
Ex Güvenlik Talimatı (XA)
İngilizce versiyonu - 01/2025for non-Ex analyzer devices
Dil:
İngilizce
Versiyon:
01/01/2025
Dosya boyutu:
2.4 MB
Dosya adı:
8030257_XA_Safety_Information_non-Ex_ml_V1-0_2016-06_WEB.pdf
-
-
-
Endüstri Çözümü (SO)
Solutions for chemicals, petrochemicals and refineries
-
Endüstri Çözümü (SO)
İngilizce versiyonu - 01/2025Endress+Hauser offers a broad product portfolio of continuous gas analyzers using state-of-the-art technologies.
Dil:
İngilizce
Versiyon:
01/01/2025
Dosya boyutu:
3.1 MB
Dosya adı:
8030415_CPR_en_V1-0_2025.01_EHS.pdf
-
-
-
Endüstri Çözümü (SO)
Solutions for waste-to-energy plants
-
Endüstri Çözümü (SO)
İngilizce versiyonu - 01/2025Endress+Hauser offers ideal automation and safety solutions for collection, sorting and recycling of waste.
Dil:
İngilizce
Versiyon:
01/01/2025
Dosya boyutu:
2.4 MB
Dosya adı:
8030416_SO_Waste_en_V1-0_2025.01_EHS.pdf
-
-
-
Endüstri Çözümü (SO)
Solutions for gas-fired power plants
-
Endüstri Çözümü (SO)
İngilizce versiyonu - 01/2025With our broad range of solutions Endress+Hauser has proven applicability in the entire power generation process, from gas flow to
combustion efficiency to emissions monitoring.Dil:
İngilizce
Versiyon:
01/01/2025
Dosya boyutu:
4.2 MB
Dosya adı:
8030417_SO_Power_en_V1-0_2025.01_EHS.pdf
-
-
-
Yetkinlik Broşürü (CP)
Soluzioni per il monitoraggio delle emissioni
-
Yetkinlik Broşürü (CP)
İtalyanca versiyonu - 05/2025Soluzioni per il monitoraggio delle
emissioni
Ampio portfolio e vasta esperienzaDil:
İtalyanca
Versiyon:
27/05/2025
Dosya boyutu:
4.5 MB
Dosya adı:
CP01596C16IT01.25-00.pdf
-
-
-
Yetkinlik Broşürü (CP)
Emission Monitoring Solutions – broad instrument portfolio and longstanding experience
-
Yetkinlik Broşürü (CP)
İngilizce versiyonu - 01/2025An overview brochure about emission monitoring, their measuring
principles and technologies, global requirements and services, a
selection guide and the measuring devices at a glanceDil:
İngilizce
Versiyon:
01/01/2025
Dosya boyutu:
4.9 MB
Dosya adı:
8029975_CP_Emission_Monitoring_Solutions_en_V3-0_2025.01_EHS.pdf
-
-
-
İnovasyon (IN)
GM700 – in-situ laser gas analyzer
-
İnovasyon (IN)
İngilizce versiyonu - 01/2025In-situ laser gas analyzer for emission monitoring and process measurement
Dil:
İngilizce
Versiyon:
01/01/2025
Dosya boyutu:
3.6 MB
Dosya adı:
8029983_IN_GM700_en_V4-0_2025.01_EHS.pdf
-
Önerdiğimiz seçeneklerden birini seçin
-
-- selected coding-- selected label99.999,00<%label%>
-
Looking for more options? Please use the individual configurator to continue.
-
-- selected coding-- selected label99.999,00<%feature%>
-
<%label%>99.999,00
-
Looking for more options? Please use the individual configurator to continue.
-
Process Connection
-
<%label%>99.999,00
-
<%label%>99.999,00
-
-
<%feature%><%coding%><%label%>
- CAD çizimleri CAD çizimleri
- CAD çizimleri
-
Parça başına fiyat
-
<%range%><%price%>
-
- Opsiyonel eklentiler