Deltabar FMD71 - Electronic differential pressure

Electronic
differential pressure
Deltabar FMD71

Electronic differential pressure system utilizing two ceramic sensor modules and one transmitter

FMD71

Karşılaştır

Özelliklere genel bakış

Accuracy

0.075% of individual sensor,
"PLATINUM" 0.05% of individual sensor
Process temperature

–25...+150°C
(–13...+302°F)
Pressure measuring range

100mbar...40bar
(1.5psi...600psi)
Process pressure / max. overpressure limit

60 bar (900 psi)
Material process membrane

Ceramic
316L, AlloyC
Measuring cell

100 mbar...40 bar
(1.5 psi...600 psi)

Tüm özelliklere bak

Uygulama alanı

The electronic dp Deltabar FMD71 is a differential pressure system, used to measure the pressure or level, volume or mass of liquids in pressurized tanks or distillation columns/evaporators. The high pressure sensor (HP) measures the hydrostatic pressure. The low pressure sensor (LP) measures the head pressure. The level is calculated in the transmitter using these two digital values. The electronic dp system eliminates issues of traditional differential pressure measurements.

For differential pressure, level, volume or mass measurement of liquids in pressurized tanks and distillation columns/evaporators.

Process connections: Threads, flanges and hygienic connections
Process temperature: -40 up to +150°C (-40 to +302°F)
Measuring range: 100mbar to +40bar (6 to 600psi)
Accuracy: Single sensor up to ±0.05%, system up to ±0.07%
International explosion protection certificates, hygienic approvals

Avantajlar

Eliminates traditional mechanical issues resulting in greater process availability and reliability
Overload-resistant high purity ceramic sensor (99.9% Al₂O₃)
Safety risks are minimized with the new electronic differential pressure system architecture and design
Lowest total cost of ownership due to reduced installation time, maintenance, downtime and spare requirements
Multivariable level measurement: HART-based differential pressure, head pressure and sensor temperatures from one system
Continuous health indication of the entire system via HART-based diagnostic
High reproducibility and long-term stability

Videolar

Pressure measuring principle
The new electronic dp system

Extended seçim

Üst düzey ürünler
Son derece fonksiyonel ve uygun

Teknik mükemmellik

Sadelik

FLEX nedir?

Basit ürünler
Seçmesi, kurması ve çalıştırması kolay

Teknik mükemmellik

Sadelik

FLEX nedir?

Standart ürünler
Güvenilir, sağlam ve az bakım gerektiren

Teknik mükemmellik

Sadelik

FLEX nedir?

Üst düzey ürünler
Son derece fonksiyonel ve uygun

Teknik mükemmellik

Sadelik

FLEX nedir?

Özelleştirilmiş ürünler
Zorlu uygulamalar için tasarlanmış

Teknik mükemmellik

Sadelik

Değişken

FLEX nedir?

FLEX seçimleri	Teknik mükemmellik	Sadelik
F L E X Fundamental seçim Temel ölçüm ihtiyaçlarınızı karşılayın	Teknik mükemmellik	Sadelik
F L E X Lean seçim Ana proseslerinizin üstesinden kolayca gelin	Teknik mükemmellik	Sadelik
F L E X Extended seçim Proseslerinizi yenilikçi teknolojilerle optimize edin	Teknik mükemmellik	Sadelik
F L E X Xpert seçim En zorlu uygulamalarınızda uzmanlaşın	Teknik mükemmellik	Sadelik Değişken

FLEX seçimleri hakkında daha fazlasını öğrenin

Loading alternative products

Başarı öyküleri

Yeni Liquiphant FTL51 ile SIL kanıt testi aralıklarını uzatın

Müşterimiz olan CABB firmasının yeni Liquiphant FTL51 ile SIL kanıt testi aralıklarını nasıl uzatabildiğini keşfedin
Devamını okuyun
Tank sistemleri için optimize lojistik konsepti

Kimyasal madde dağıtıcısı Brenntag Schweizerhall AG'nin Basel tesisinde son derece etkili bir lojistik konseptini hayata geçirdik.
Devamını okuyun
Rafine yağ tesislerinde deodorize kolonu seviye ölçümü

Yağ rafinasyonu, safsızlık miktarı fazla olan ham yağı, tüketiciler tarafından kullanıma hazır hale getirme işlemidir.
Devamını okuyun
Tanker dolumu - güvenlik sorunlarını güvenilir bir ortak ile çözün

Endress+Hauser, uluslararası kimya ve plastik distribütörüne “toplam anahtar teslim çözüm” sağlıyor
Devamını okuyun

Measuring principle

Differential pressure
Characteristic

Electronic differential pressure transmitter with ceramic sensor (Ceraphire) for level, volume or mass measurement in liquids.
Supply voltage

4...20 mA HART:
12...45V DC (Non Ex)
Ex ia: 12...30V DC
Reference Accuracy

0.075% of individual sensor,
"PLATINUM" 0.05% of individual sensor
Long term stability

0.05% of URL/year of individual sensor
Process temperature

–25...+150°C
(–13...+302°F)
Ambient temperature

–40...+80°C
(–40...+176°F)
Measuring cell

100 mbar...40 bar
(1.5 psi...600 psi)
Vacuum resistance

0 mbar
Max. Turn down

100 : 1
Max. overpressure limit

60 bar (900 psi)
Process connection

Threads
Flansch (DIN, ASME, JIS)
Process connection hygienic

DIN11851
DIN11864-1
Tri-Clamp
DRD
Varivent
Material process membrane

Ceramic
316L, AlloyC
Material gasket

Viton, Kalrez, EPDM, NBR, Silicone
Fill fluid

Silicone Oil
Material housing

Die-cast aluminum
Stainless steel
Communication

4...20 mA HART
Certificates / Approvals

ATEX, FM, CSA, IECEx, NEPSI, INMETRO, UK Ex
Design approvals

NACE MR0175,
EN10204-3.1,
Hygienic approvals

EHEDG,
3A

Measuring principle

Differential pressure
Characteristic / Application

Electronic differential pressure transmitter with ceramic sensor (Ceraphire) for level, volume or mass measurement in liquids.
Supply / Communication

4...20 mA HART:
12...45V DC
Exia: 12...30V DC
Accuracy

0.075% of individual sensor,
"PLATINUM" 0.05% of individual sensor
Long term stability

0.05% of URL/year of individual sensor
Ambient temperature

–40...+80°C
(–40...+176°F)
Process temperature

–25...+150°C
(–13...+302°F)
Process pressure / max. overpressure limit

60 bar (900 psi)
Pressure measuring range

100mbar...40bar
(1.5psi...600psi)
Process connection

Threads
Flanges (DIN, ASME, JIS)
Process connection hygienic

DIN11851
DIN11864-1
Tri-Clamp
DRD
Varivent
Communication

4...20 mA HART
Certificates / Approvals

ATEX, FM, CSA, CSA C/US, IEC Ex, NEPSI, INMETRO
Design approvals

NACE MR0175
EN10204-3.1
Hygienic approvals

FDA
3A
Options

4-line digital display
SS- or Aluminium housing
Application limits

Use Software Applicator Sizing Electronic DP

	EN	TR
26/02/2018
08/06/2015
14/04/2014
15/11/2013
01/08/2012

Dil:	İngilizce
Versiyon:	26/02/2018
Dosya boyutu:	711.1 KB
Dosya adı:	GP01013PEN_0617.pdf

	EN	TR
06/10/2021
26/02/2018
08/06/2015
14/04/2014
15/11/2013

Dil:	İngilizce
Versiyon:	06/10/2021
Dosya boyutu:	2.4 MB
Dosya adı:	TI01033PEN_0721.pdf

	EN	TR
28/10/2021
19/06/2020
08/11/2019
17/08/2017
30/06/2016

	EN	TR
17/05/2021

	EN	TR
19/05/2021

	EN	TR
31/03/2020

	EN	TR
19/07/2016
26/02/2016
05/03/2014
19/06/2012

Electronicdifferential pressureDeltabar FMD71

Electronic differential pressure system utilizing two ceramic sensor modules and one transmitter

Özelliklere genel bakış

Accuracy

Process temperature

Pressure measuring range

Process pressure / max. overpressure limit

Material process membrane

Measuring cell

Uygulama alanı

Avantajlar

Videolar

Extended seçim

Başarı öyküleri

Yeni Liquiphant FTL51 ile SIL kanıt testi aralıklarını uzatın

Tank sistemleri için optimize lojistik konsepti

Rafine yağ tesislerinde deodorize kolonu seviye ölçümü

Tanker dolumu - güvenlik sorunlarını güvenilir bir ortak ile çözün

Measuring principle

Characteristic

Supply voltage

Reference Accuracy

Long term stability

Process temperature

Ambient temperature

Measuring cell

Vacuum resistance

Max. Turn down

Max. overpressure limit

Process connection

Process connection hygienic

Material process membrane

Material gasket

Fill fluid

Material housing

Communication

Certificates / Approvals

Design approvals

Hygienic approvals

Measuring principle

Characteristic / Application

Supply / Communication

Accuracy

Long term stability

Ambient temperature

Process temperature

Process pressure / max. overpressure limit

Pressure measuring range

Process connection

Process connection hygienic

Communication

Certificates / Approvals

Design approvals

Hygienic approvals

Options

Application limits

Back

Deltabar FMD71, FMD72 Description of Device Parameters

Deltabar FMD71, FMD72

Weld-in adapter, process adapter and flanges

Deltabar FMD71, FMD72

Deltabar FMD71, FMD72 Operating Instructions

Deltabar FMD71, FMD72 Description of Device Parameters

Cerabar S, Deltabar S, Deltapilot S - Exchange of the push buttons

Deltabar FMD71, FMD72 Brief Operating Instructions

Conversion instructions Cerabar S PMC/PMP7x and Deltabar S PMD/FMD7x from software version 1.x to software Version 2.x or higher

Screw set

Process sealing Installation instruction

Terminal module Installation Instructions

Installation instruction - Ground terminal T14/T15/T17, F30/F31

Transmitter electronics Installation instruction

Plug M12 Installation instructions

Sensor cover, sensor electronics Installation instruction

Sensor FMD71, FMD72 and cables Installation instruction

M12 plug for transmitter

M12 plug for sensor FMD71/72

Mounting kits for housing T14/T15/T17

Process seal

Installation Instructions

Back

Electronic
differential pressure
Deltabar FMD71